CONTEC PM5000 CE hospital ICU cheap patient monitor Siriusmed
| Technical Specification | ||||
| Enclosure | ||||
| Weight | ||||
| Dimensions | 324mmWx 324mmHx 183mmD | |||
| Display | ||||
| Screen size | 307.3mm(12.1in.) measured diagonally | |||
| Screen type | TFT LCD, white LED backlight, viewing cone of 60°and optimal viewing distance of 1 meter | |||
| Resolution | 800 x 600 pixels | |||
| Alarms | ||||
| Categories | Patient Status and system status | |||
| Priorities | Low, medium, high | |||
| Notification | Audible and visual | |||
| Setting | Full storage, low battery, sensor off | |||
| Alarm volume level | 45 to 85 decibels | |||
| Alarm system delay | <10 seconds | |||
| SpO2 | ||||
| Aturation range | 1% to 100% | |||
| Accuracy | 70 -100% (±2%)<70% undefined | |||
| Resolution | 1% | |||
| Display sweep speed | 10.00mm/sec | |||
| Pulse Rate | ||||
| Aturation range | 25-250bpm | |||
| Accuracy | ±2 bpm /±2%take maximum | |||
| Resolution | 1bpm | |||
| ECG | ||||
| Aturation range | 25-250bpm | |||
| Accuracy | ±2 bpm /±2%take maximum | |||
| Resolution | 1bpm | |||
| Lead selection | I,II,III,V,AVF,AVL,AVR | |||
| Gain selection | 0.25,0.5,1,2 and 4(mm/mv),auto | |||
| Sweep speed | 6.25 mm/s,12.5mm/s, 25mm/s,50mm/s | |||
| NIBP | ||||
| Method | Oscillometric | |||
| Aturation range | 0-300mmHg | |||
| Accuracy | Based on ANSI/AAMI SP10:1992 and 2002 Standards | |||
| Measurement time | 30 to 50 seconds typical, 120 seconds maximum | |||
| Auto Interval Times | 2,3,5,10,30 min or 1,2h | |||
| RESP | ||||
| Aturationrange | 0-120rpm | |||
| Accuracy | ±1rpm | |||
| Resolution | 1rpm | |||
| Temperature | ||||
| Channel | Two | |||
| Aturation range | 25-45℃ | |||
| Accuracy | ±0.2℃,plus the temperature sensor tolerance | |||
| Resolution | 0.1℃ | |||
| ETCO2 (Optional) | ||||
| Mode | Sidestream | |||
| Aturation range | 0-150mmHg | |||
| Accuracy |
0-40mmHg ±2 mmHg 41-150mmHg ±10%of reading |
|||
| Resolution | 0.1 mmHg | |||
| Flow rate | 50ml/min ±10 ml/min | |||
| Electrical | ||||
| Battery | Four new lithium batteries with 4400mAh will typically provide 4.5 hours of monitoring with external communication, no audible alarm sound, and at an ambient temperature of 25℃ | |||
| Type | Lithium batteries, 4400mAh, DC 11.1V | |||
| Voltage | AC 100-240V 50-60Hz, 80VA | |||
| Environmental | ||||
| Operating Temperature | 0℃-50℃(32°F to 122°F) | |||
| StorageTemperature | -40℃-75℃(-40°F to 167°F) | |||
| Relative | 15% to 95%, noncondensing | |||
| Humidity | ||||
| Altitude | -500 to 5000m (-1640 to 16404ft) | |||
| Trend | ||||
| Memory |
Tabular: Saves a total of 120 hours of data events, saves date and Time, alarm conditions, measurements |
|||
| Tabular format | One table for all parameters | |||
| Configuration | ||||
| Stand configuration | SpO2+ECG+NIBP+RESP+TEMP | |||
| Optional | Sidestream ETCO2 Module, Double Lithium Batteries, IBP, Trolley, Recorder, Brace, IPMS8600 Central monitoring system | |||
About us
Beijing Siriusmed Medical Device Co., Ltd is among the top level Manufactures of anesthesia machine and ventilators in China since 2013. Our main products are: Anesthesia machine, vaporizer, ICU Ventilator, neonatal ventilator, and air compressors. With the quality certificates of NMPA, ISO 13485, CE and BGMP, we offer the whole OR & ICU solutions to the world. Right now we established the long term ditributors, OEM & SKD partners in Germany, UK, U.S. India, Brazil, Morocco ... etc more than 80 countries in the world. Welcome to join us for the long term cooperation for our products: anesthesia machine, anestheisa ventilator, vaporizer, ventilator, air compressor and monitors... etc.
